1. After the preparation work, turn on the operation switch, carefully adjust the working current and start welding.
2. For any reason, when the electric fusion welding machine stops working halfway, the timer will record the time when the current passes. Press the rst key to reset and re-operate)
3. Make preparations, connect the wires—turn on the power switch—set the voltage level and time—turn on the operation switch—the timer starts counting—adjust the current to the set value (slow adjustment) and start welding—when the set time is reached, the buzzer beeps Automatic power off when the device sounds—turn off the operation switch to OFF, return the current knob to zero—take off the connecting wire clip—cool down according to the specified time—check—end of work.
4. The welder will automatically power off when the voltage is too high or the current is too large. Therefore, when judging whether the welder is working under normal data, just turn off and then turn on the power, cut off the device and restore the system to normal state.
